Back

[Recruitment] Bynav2016 campus recruitment started

by bynav


Bynav2016 campus recruitment started

 

Join bynav, it will be a trip about dreams, full of cutting-edge technical challenges, a working environment with a human atmosphere; choose Beiyun Technology, you will have the opportunity to enjoy professional career planning and guidance, generous salary and benefits The effectiveness of Beiyun Technology will give full play to your ingenuity and work side by side with the best technical talent in the industry.
We look forward to joining you with a spirit of struggle, passion, responsibility and ability to work!

 


 


First, bynav2016 campus recruitment details:

1) Recruitment target: 2016 graduates (undergraduate, master and doctoral students graduated during 2016.1.1-2017.3.31)

 

2) Recruitment positions: GPS Beidou navigation/RTK algorithm software engineer, FPGA development engineer/IC front end/logic development engineer, MFC software engineer/C++ software engineer, embedded software engineer, hardware/circuit design R&D engineer.

 

GPS/Beidou Navigation Baseband Signal Processing Algorithm Software Engineer

Qualifications:
1. Postgraduate or above in communication, signal processing, mathematics, etc.;
2. Familiar with GPS, Beidou navigation signal receiving algorithm principle, master the principle of spread spectrum communication, master Matlab simulation method;
3. Research and engineering experience in BPSK, QPSK, BOC and other signal acquisition, tracking, despreading, demodulation, etc. are preferred;
4. Have good advanced mathematics, signal processing skills and English reading ability.
Job Responsibilities:
1. Perform GPS satellite and Beidou satellite navigation signal acquisition and tracking performance simulation and optimization;
2. Assist in guiding the engineering implementation of the signal receiving algorithm;
3. Pre-study on the receiving method of satellite signal navigation system such as GPS and Beidou;
4. The doctor-in-chief of the National University of Defense Technology is personally responsible for pre-job training, one-on-one guidance, and project development.

 

GPS Beidou Navigation/RTK Algorithm Software Engineer

Qualifications:

1. Postgraduate or above in communication, surveying, mathematics, computer, etc.;

2. Familiar with GPS positioning and Kalman filtering principle, master Matlab simulation and C language development;

3. Research and engineering experience with positioning solution and RTK solution is preferred;

4. Good linear algebra, advanced mathematics and English reading ability.

Job Responsibilities:

1. Auxiliary GPS/Beidou receiver positioning solution and upper layer processing software development;

2. GPS/Beidou positioning solution, RTK, combined navigation and other algorithms are implemented;

3. Assist in module testing and integration testing of related software, and related documentation;

4. The doctor-in-chief of the National University of Defense Technology is personally responsible for pre-job training, one-on-one guidance, and project development.

 

FPGA Development Engineer / IC Front End / Logic Development Engineer

Qualifications:

1. Graduate degree or above in related fields such as microelectronics and communication engineering;

2, proficient in Verilog language, familiar with Verilog simulation, verification;
3. Proficiency in the development, simulation and verification of IC front-end/FPGA;
4. Experience with actual IC front-end design or FPGA engineering project is preferred.

Job Responsibilities:
1. Responsible for the development, design, documentation, testing and other related FPGA development of Beidou navigation;
2. Responsible for the RTL development, testing and verification of the front end of the IC chip related IC chip;
3. The doctor-in-chief of the National University of Defense Technology is personally responsible for pre-job training, one-on-one guidance, and project development.

 

MFC Software Engineer / C++ Software Engineer

Qualifications:
1. Postgraduate or above in communication engineering, automation, electronics, computer, etc.;
2. Proficient in development tools such as C/C++, MFC and Visual C++;
3, familiar with RS232, TCP / IP, multi-threading, database, Windows program debugging, GDI and other development;
4. Familiar with the development of PC-side integration software, monitoring software, and application software;
5, has a wealth of Windows software development experience, with actual project or engineering experience.

Job Responsibilities:
1. Responsible for the application software, monitoring software and UI software development related to Beidou navigation;
2. Responsible for system integration, system design, document writing and testing;
3. The doctor-in-chief of the National University of Defense Technology is personally responsible for pre-job training, one-on-one guidance, and project development.

 

Embedded Software Engineer

Qualifications:
1. Postgraduate or above in communication engineering, automation, electronics, computer, etc.;
2, proficient in C language and embedded development tools (Keil, etc.), understand assembly language;
3, proficient in ARM or MCU, familiar with serial interface, GPIO, parallel bus and other embedded interface development;
4. Have rich experience in embedded software development and have practical project or engineering experience;
5, GPS / Beidou navigation related majors are preferred.

Job Responsibilities:
1. Responsible for embedded software development, design, document writing and testing related to Beidou navigation;
2. The doctor-in-chief of the National University of Defense Technology is personally responsible for pre-job training, one-on-one guidance, and project development.
 
 

Hardware / Circuit Design R&D Engineer

Qualifications:
1. Bachelor degree or above in electronics, communication, automation, computer, etc.;
2, have schematic design or PCB design experience, have a strong interest in electronic circuits;
3. Understand the design of digital circuits such as FPGA, ARM, DC, etc., or understand the analog circuit design such as up and down frequency conversion and filtering;
4. Understand the oscilloscope, spectrum analyzer, signal source and other instruments and equipment, familiar with the electrical equipment and welding process;
5. Those who have participated in e-sports or have experience in actual engineering projects are preferred.

Job Responsibilities:
1. Auxiliary completion of hardware schematic design and verification work;
2. Auxiliary to complete the testing, production and quality management of related hardware;
3. Responsible for collating and analyzing various data and document archives in production test;
4. The doctor-in-chief of the National University of Defense Technology is personally responsible for pre-job training, one-on-one guidance, and project development.

 

software testing engineer

Qualifications:
1. Bachelor degree or above in electronics, communication, automation, computer, etc.;
2, have software testing experience, understand software testing tools, have a strong interest in software testing;
3. Familiar with C/C++ language, familiar with software engineering and software development process;
4, good at communication, practical engineering experience is preferred.

Job Responsibilities:
1. Perform software, product testing, bug management, document writing, etc.
2. Complete the design and development of test cases for product functions;
3. The doctor-in-chief of the National University of Defense Technology is personally responsible for pre-job training and one-on-one guidance.

 

GPS/Beidou Product Technical Support Engineer

Qualifications:
1. Bachelor degree or above in electronics, communication, automation, computer, etc.;
2. Have a strong interest in digital products, computer applications, electronic products, etc.;
3, good at communication, practical engineering experience is preferred.

Job Responsibilities:
1. Master the company's GPS/Beidou related products, train customers, and collect customer needs;
2. Solve common faults during product use and write relevant documents;
3. Test and trial the product, and propose design suggestions for the product;
4. The doctor-in-chief of the National University of Defense Technology is personally responsible for pre-job training and one-on-one guidance.

 

RF Circuit Design Engineer

Qualifications:
1. Bachelor degree or above in communication, electronics or microwave;
2, with a good circuit background knowledge (low frequency, high frequency, RF and microwave circuit basics);
3. Familiar with the RF front-end architecture of the receiver, and have a strong interest in analog circuits;
4. Familiar with RF CAD software simulation and design products (ADS, HFSS, etc.);
5, skilled use of PADS, Candence and other PCB design software, can independently complete the design, debugging and testing of RF circuits;
6. Familiar with the use of various RF instruments such as network analyzers, signal generators, and spectrum analyzers;
7. Proficiency in reading English professional technical materials;
8. Have a good teamwork spirit, innovative spirit, learning ability and technical ability.

Job Responsibilities:

1. Responsible for microwave RF channel design, such as LNA, PA, mixer and PLL circuit;
2. Responsible for the principle design, simulation verification, PCB layout, Layout inspection and performance evaluation of RF channel;
3. Write a test outline and complete the test and debugging of the RF module;
4. Participate in product application promotion and system application optimization.

5. The doctor-in-chief of the National University of Defense Technology is personally responsible for pre-job training and one-on-one guidance.

 

3) Recruitment number: 20+

 

4) School recruitment time: August 20th - November 30th

 

5) Registration method: Please send your resume to our company hr@bynav.com.

 

6) Screening process: resume delivery (title name + school + post) - mail written test - on-site interview - final interview - send offer

 

Second, Beiyun Technology 2016 recruitment process details:

1) Resume delivery time:

August 20 - November 30, 2015

 

2) About the mail written test:

Beiyun Technology 2016 campus recruitment, mail written test will be carried out in the form of mailing links, students need to download the link themselves, after completing the written test questionnaire, reply to the corresponding post mailbox by mail.

Students who participate in the written test must carefully read the precautions of the questionnaire, do not send the wrong mailbox, ensure that the personal information is true and effective, and ensure that the answer process is completely completed by myself. If you do not meet the requirements or are found to have any cheating or fraudulent behavior, we will cancel the interview qualification.

Students who pass the written test will receive an email from the company for an on-site interview. Students are advised to keep an eye on their emails and keep their mobile phones open.

 

3) About the on-site interview:

Special interview time for major universities: September 15th - November 30th (the specific itinerary will be announced to everyone on the official website from late August to early September), students who pass the written test or resume will get an interview opportunity.

Students who have participated in the summer intern recruitment and internship at the company, please wait for the interns starting in mid-September to turn to the frontal trial arrangement.
 

4) About the final interview:

Through the on-site interview, the company will conduct a telephone call back to confirm the final interview results.

 


Third, about offer:

We will issue the employment notice to the students who passed the interview as soon as possible. Please refer to the final notice of the company.

Please submit your email address to access support documents.